Top X Technology Co., Ltd
C&T RF Antennas Inc
Mobile: 0086-13412239096
Second-dimensional image measuring instrument
Source:Original | Author:C&T RF Antennas Inc | Publish time: 2018-01-26 | 3642 Views | Share:


Product aliases

The second element of the video measuring instrument alias is the video measuring instrument, two-dimensional video measuring instrument, two yuan, automatic video measuring instrument, automatic video measuring instrument, two yuan video measuring instrument, 2.5D video measuring instrument, video mapping instrument, etc. are Refers to the same kind of instrument, is the leap development of the traditional measurement technology, is the perfect combination of the traditional optical projection and computer products.


working principle

Second-element image measuring instrument uses its own hardware (CCD, eyepiece, objective data cable, video capture card) to capture the image can be transmitted through the data line to the computer's data acquisition card, and then by the software imaging on a computer monitor, The operator uses the mouse to make quick measurements on the computer. The above process is basically completed in a few thousandths of a second, so you can think of him as a real-time testing equipment, or a narrow point can be called dynamic measuring equipment. If the configuration is right, the device will never produce image lag. Due to the size of the workpiece, the table can choose a different trip. Adjustable brightness of the light source, you can choose the most appropriate light conditions in a variety of light conditions.


Operation method

According to their mode of operation can be divided into two types of automatic operation and manual operation. Automatic operation is through the video measuring instrument connected to the computer mouse to control the operation of the machine, so as to achieve accurate measurement of the object's goal; and manual operation is controlled by the multi-joystick to measure the measured object-related data.


Software introduction

The second-element image measuring instrument software is the second-element image measuring instrument data processing center. After capturing the workpiece image through the image detection system, the image data is transferred to a computer, and the measurement software performs various geometric element measurement and data analysis.