Top X Technology Co., Ltd
Email: rfproducts1@ctrfantennas.com
C&T RF Antennas Inc
Top X Technology news and technical
  • RF identification RFID test

    2018-04-17

    Every RFID communication system must pass regulatory requirements and meet the standards used. However, today, system optimization separates winners from losers in this fast-growing industry. This article discusses the testing challenges faced by designers of RFID communication systems: regulatory t

  • Automatic Connector Insertion Force Testing Machine

    2018-01-27

    Automatic Connector Insertion Force Testing Machine is an experimental instrument used to solve a variety of connector testing fixture problems, and test the male and female connectors can be automatically aligned, there will be no unilateral eating problems.

  • Second-dimensional image measuring instrument

    2018-01-26

    The secondary element image measuring instrument (aka image mapping instrument) is based on the CCD digital image and relies on the powerful software capabilities of computer screen measurement technology and space geometry calculation. After the computer is installed with dedicated control and grap

  • Salt Spray Tester

    2018-01-26

    Salt spray corrosion test box through the assessment of the material and its protective layer of salt spray corrosion, and similar protective layer of the process of quality comparison, at the same time can assess the ability of certain products salt spray corrosion; The product is suitable for part

  • RoHS Detector

    2018-01-26

    RoHS detector is the EU RoHS test standard testing equipment. Simple to say is the test lead Pb, cadmium Cd, mercury Hg, hexavalent chromium Cr6 +, PBDE PBDE, PBB PBB six kinds of harmful substances instruments. RoHS Directive is the country just enacted "electronic and electrical equipment restr

  • Constant temperature and humidity chamber

    2018-01-25

    Constant temperature and humidity test chamber, also known as constant temperature and humidity testing machine, constant temperature and humidity test chamber, programmable humidity test chamber, thermostat or constant temperature and humidity box, for testing materials in a variety of environments

  • Network Analyzer

    2018-01-20

    Network analyzer is a new type of instrument for measuring network parameters. It can directly measure the complex scattering parameters of active or passive, reversible or irreversible dual-port and single-port networks, and gives the amplitude and phase of each scattering parameter Frequency chara

  • Microwave Anechoic Chamber

    2018-01-14

    Microwave anechoic chamber is to use a wave-absorbing material to create a closed space, so that you can create a pure electromagnetic environment in the darkroom, microwave anechoic material can be all-absorbing materials, the main material is polyurethane absorbing sponge SA (high-frequency use) I

  • How to get 4 5G orders?

    2019-03-06

    A working group will be established to share expertise and the 5G global ecosystem. It will also collaborate in areas such as data service growth, rich media services, mobile financial services, businesses, and resale.

  • NFC architecture and standards involved

    2019-02-25

    The NFC technology evolved from contactless radio frequency identification (RFID). The RFID transmission range can reach several meters or even tens of meters. It can only read and determine information, and NFC technology emphasizes information exchange. Near field, communication is operated at a

  • 5G and future antenna technology

    2019-01-11

    According to the definition of the industry, an antenna is a transducer that transforms a guided wave propagating on a transmission line into an electromagnetic wave propagating in an unbounded medium (usually free space), or vice versa, ie transmitting or receiving. Electromagnetic waves. Popularly

  • WiFi antenna requirements for PCB layout and structure

    2018-12-21

    The internal antennas are often used in several forms, in the form of shrapnel and chip patch antennas and FPC antennas. The form of the patch antenna is of a uniform size, has a fixed size, and the position and size of the pad are fixed according to the specific specifications of the antenna. In ad

  • 5G has not yet tasted fresh and began to think about 6G?

    2018-11-20

    At present, the 5G communication technology that the public hopes have just completed the first stage, and it has been a long time since it was officially commercialized. However, some people have begun to think about 6G before 5G. A few months ago, Google selected "6G" as one of the most popular wo

  • Application of RF and Microwave Technology in Security Field

    2018-11-13

    The urgent demand for the construction of safe cities has promoted the rapid development of the security industry, and the words such as smart cities and intelligent security have also become popular, including multi-technology integration management including video surveillance, identification, hid

  • What’s LoRa?

    2018-11-08

    LoRa Introduction There are several wireless technologies in the Internet of Things applications that can form a local area network or a wide area network. The main wireless technology to form a LAN 2.4GHz WiFi, Bluetooth, Zigbee, etc., composed of wide area network wireless technology mainly 2G / 3

  • Comprehensive interpretation of NB-IoT

    2018-11-03

    This article will give you a detailed introduction to this brand-new technology, NB-IoT, from the value of its significance, characteristics and advantages, the industry chain it drives, the path of the company's development, and future investment opportunities.

  • WiFi antenna requirements for PCB layout and structure

    2018-10-26

    Abstract: The internal antennas are often used in several forms, in the form of shrapnel and chip patch antennas and FPC antennas. The form of the patch antenna is of a uniform size, has a fixed size, and the position and size of the pad are fixed according to the specific specifications of the ante

  • The United States has developed a new generation of miniaturized antenna with a size of less than 1

    2018-07-29

    The United States has developed a new generation of the miniaturized antenna with a size of less than 1 mm using a new signal transmission and reception method