Contact us for the free samples!
Email: rfproducts1@ctrfantennas.com
C&T RF Antennas Inc
Mobile: 0086-17322110281

Indoor Antenna Passive Leaf HD TV Antenna

Indoor Antennas Passive Leaf HDTV Antenna 35 Mile Range 4K HD VHF UHF Freeview for Life Local Channels and Programming for All Type of Television.

0.00
0.00
  
Product Description

Indoor Antennas Passive Leaf HDTV Antenna 35 Mile Range 4K HD VHF UHF Freeview for Life Local Channels and Programming for All Type of Television.



Indoor Antenna Passive Leaf HD TV Antenna

Indoor Antennas Passive Leaf HDTV Antenna 35 Mile Range 4K HD VHF UHF Freeview for Life Local Channels and Programming for All Type of Television.

The CTRF-HDTV-H102A1 has 330*300*10mm size and 12ins coaxial cable RG174 and F male connector, it’s suit all the TVs.

The C&T RF Antennas Inc Indoor Antenna Passive Leaf HD TV Antenna specifications:

The C&T RF Antennas Inc Indoor Antenna Passive Leaf HD TV Antenna Electrical Specifications

RF Antenna Type

Indoor HDTV Antenna

Model

CTRF-HDTV-H102A1

Frequency

170-240MHz, 470-860MHz

Active or Passive

Passive

Gain

5dBi

VSWR

≤1.5

Impedance

75Ω

Polarization

Linear

Cable Type

RG174

Connector

F-Male

Cable Length

3Meters

Power Supply Connector

Null

Working Voltage

5V

Current Consumption

20mA

Receiving distance

35-Miles

Lightning Protection

DC Ground

Mechanical Specifications

PCB Board Dimension

330*300*10mm

Weight

Approx. 0.2KG

Material

ABS

Operation Temperature

-40˚C ~ +85˚C

Storage Temperature

-40˚C ~ +80˚C

Color

Black

Relative Humidity

Up to 95%

Mounting

Sticker

RoHS

Compliant

Service

OEM/ODM

Applications

Compatible with 720p, 1080i, 1080p/ATSC




















































The C&T RF Antennas Inc Indoor Antenna Passive Leaf HD TV Antenna Pictures:
The C&T RF Antennas Inc Indoor Antenna Passive Leaf HD TV Antenna
C&T RF Antennas Inc - hdtv antenna indoor antenna f male connector

Do I need a signal amplifier or a rotator?

 

If you’re unable to receive distant TV stations due to low signal levels, you should consider a signal amplifier. It’s always best to collect as much signal as possible at the antenna, so don’t skimp on a small one and try to make up for it with an amplifier.

 

But if a large antenna still won’t pull in the station without picture break-up, a signal amplifier might help. You also might need one if you have an excessively long run of cable, say from a distant spot on a piece of land to a house.

 

A rotator will turn the TV antenna in any direction with the click of a remote. These are useful if you want to receive weaker stations from several different locations although it’s worth testing out if a fixed antenna will get all your stations before investing in a rotator.

 

The connection from your antenna to your TV is every bit as important as the antenna itself. You need a high-quality coaxial cable (“coax” for short) for the job. Coax has a center wire that carries the signal and is surrounded by a plastic insulator. Then there’s an outer braid that shields the center cable from interference, and an outer sheath to protect the cable from the elements.

 

If you are ditching satellite for over-the-air TV, you can probably use the existing coaxial cable from the satellite dish, but if it doesn’t work, be prepared to buy and run new coax. Make the cable a single run if possible because each time you connect shorter cables together, a little signal is lost. The most common type of cable for TV is called RG-6.

 

The 12-foot coax cable for connecting to the TV is detachable and long enough that it should be sufficient to position the antenna in most rooms (especially if you’re mounting it behind or above your TV). This antenna uses sticky pads to attach to the wall, and you can pull it off and move it without damage to the wall. It’s rated to pull in UHF/VHF HDTV channels within a 35-mile radius and can be purchased with a 23 dB active amplifier if you need more reach.

 

The C&T RF antennas Inc is Providing a wide range of off-the-shelf products along with a large volume of RF OEM and some contract manufacturing, The C&T RF antennas Inc has the experience, knowledge and capabilities to engage with companies and individuals that need very high product quality, no matter the order volume.

 

The C&T RF Antennas Inc offers maximum coverage designed for WLAN and Cellular/LTE frequency bands. Single, dual, tri-band and concurrent radio, as well as switched Smart Antenna options are available.

 

It comes in a compact, robust articulated lightweight design, making it an ideal choice for handheld RF Explorer Spectrum Analyzer.

  • Title
  • Message
  • Email Address*
Send