Top X Technology Co., Ltd
Email: rfproducts1@ctrfantennas.com
C&T RF Antennas Inc
Mobile: 0086-13412239096

12dBi High Gain 1.4GHz Fiberglass Antenna Omnidirectional Antenna

12dBi High gain 1.4Ghz omnidirectional fiberglass antenna for private network antenna with 1.8m size.


Key Specifications/Special Features:

Features:

Good appearance

Durable, corrosion resistance

Full day for working, waterproof

Optimized dimensions

High gain, lower VSWR, strongly anti-interference


0.00
0.00
  
Product Description

12dBi High gain 1.4Ghz omnidirectional fiberglass antenna for private network antenna with 1.8m size.


Key Specifications/Special Features:

Features:

Good appearance

Durable, corrosion resistance

Full day for working, waterproof

Optimized dimensions

High gain, lower VSWR, strongly anti-interference



12dBi High gain 1.4Ghz omnidirectional fiberglass antenna for private network antenna with 1.8m size.


Key Specifications/Special Features:
Features:
Good appearance
Durable, corrosion resistance
Full day for working, waterproof
Optimized dimensions
High gain, lower VSWR, strongly anti-interference


12dBi  1.4GHz  omnidirectional  fiberglass Antenna Specifications:
Item: CTFB- 1414-N-32-1800
Frequency: 1427-1447MHz
Gain: 12dBi
H-Beam width: 360°
V-Beam width: 7°±2°
V.S.W.R: ≤1.5
Connector: N-female
V.S.W.R: ≤1.5
Impedance: 50Ohms
Maximum Power: 100Matts
Antenna Design: Dipole Array
Connector: N-female
Polarization: Vertical
Dimension:  Φ 32*1800mm
Radome Material: Black Fiberglass
Storage Temperature Range: -40~+75°C
Working Temperature Range: -40~+65°C
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing


Features:
Low-Profile
Low V.S.W.R
Low Loss Design
High Gain
High Efficiency
High Sensitivity
UV-Proof
Water Proof
Sturdy
Durable
Anticorrosive
Anti-interference
Good Impact Resistance
Full Day Working
Optimized Dimensions


Welcome to C&T RF Antennas Inc


C&T RF Antennas Inc is a professional RF Antenna designer and supplier of innovative multi-band antenna products, standard, and custom RF coaxial cables and associated RF accessories. Our antennas are designed for IoT, M2M, telematics, telemetry and monitoring applications using both licensed and unlicensed frequency bands.


Our product portfolio includes internal and external antennas designed to fit into a range of portable, mobile and fixed devices as well as an extensive range of antenna solutions for indoor and outdoor use.


Our products are deployed in applications using LTE, 4G, GPS/GLONASS, WiFi, VHF, UHF and many other wireless technologies.


Innovative Solutions for Wireless communications
The C&T RF Antennas Inc is able to offer a wide range of RF Antennas and RF Coaxial Cable Assemblies.
Quality and Performance
Reliability and Durability
Competitive Price
Reliable and Honest Partnership 
Innovative and Attractive Design
Rapid Design and Delivery


Qualified and experienced R&D staff
● mechanical engineering
● electronics / RF engineering
● process engineering
New methods and procedures
High-level equipment and CAD-Systems
Easy data exchange system

5G will extend the range of frequencies used for mobile communication in legacy LTE/4G systems as well as leverage the new Radio Access Technology for 5G.


5G innovation will enable an era of connectivity like never before. Anticipated experiences from autonomous driving, tactile internet, Ultra HD video and VR based immersive technologies. Capacity-hungry communications will see demands for higher throughput, better spectral efficiency, ultra-low latency and over 100 times the current number of connections. C&T RF Antennas Inc is continuously at the forefront of wireless antenna technologies and we have various 5G antenna products to meet these demands in a range of applications.


Our range of internal and external 5G antennas. At C&T RF Antennas Inc you can work with our engineers to have the antenna tested, customized and even certified for your needs.


Custom 5G antenna solutions can be provided. Please do not hesitate to contact our customer services team for more information.

Information is corrected by Calio Huang of C&T RF Antennas Inc

Characteristics
SMC, the sheet molding compound, is made of unsaturated polyester resin, glass fiber roving, and other matching materials through a special equipment SMC forming unit, which is thickened, cut, and placed into a metal mold. Made by high temperature and high-pressure curing. SMC and its molded products are emerging as glass fiber reinforced plastics, commonly known as FRP. The processing methods can be divided into: hand lay-up, spray forming, pultrusion, winding forming, resin transfer molding, and compression molding.  SMC and its molded products have the following characteristics: lightweight, high strength, accurate size, good batch quality consistency, and zero shrinkage of the product. With Class A surface level, mechanized, the high degree of automation, suitable for products with high surface quality requirements, large output, and uniform thickness.


Three high
High precision, high efficiency, high gain
The most important task in the use of SMC for the manufacture of antennas is to fully exploit their features and achieve the high precision of antennas from product design and process fabrication. Under the condition that the shrinkage rate of the material and the SMC molding shrinkage rate have been considered in the mold size design, the shape of the SMC antenna reflective surface deviates from the original design parabola after molding, that is, the accuracy of the SMC molded antenna is completely guaranteed by the precision of the mold. . The RMS value of the SMC antenna molded integral reflection surface is 0.25 mm, and the RMS value of the single-piece reflection surface of the split antenna is less than 0.3 mm, and the RMS value of the reflective surface after assembly is less than 0.6 mm.


Anti-corrosion
Conventional antenna materials such as aluminum plates and steel plates are made of metal materials, and are excellent in acid resistance, alkali, salt, and corrosion resistance, and are SMCs which are non-metal dielectric composite materials. The Pilkington laboratory in the United States used infrared to analyze the surface of SMC materials and found that its surface is covered by additives, resin, and very fine calcium acid filler. It has good acid resistance, water resistance, and corrosion resistance. The antenna reflection made by this material is solved. The disadvantages of traditional metal material antennas are easy to corrode. In coastal areas, rainy, humid areas and areas with excessive acid rain, the corrosion of SMC molded antennas is particularly prominent. The US company Podlin has conducted more stringent corrosion tests. The SMC molded antenna samples were placed in 130 highly corrosive chemical environments at an ambient temperature of 50 ° C. The results showed that the test samples showed little or no change.


long life
The average aluminum plate antenna is as small as 2-3 years in the coastal area, and more often 4-6 years. It is generally damaged by salt spray erosion and aging. The most obvious example is cable TV in Taiwan, which was built earlier than the mainland. It is estimated that there are nearly 1000 satellite TV receiving antennas on the island, which were all built in the mid-1980s. They are all aluminum plate antennas. They have been replaced since the early 1990s. This time, SMC molded antennas have been used. SMC molded antennas have been used. The service life is generally more than 15 years; the SMC molded antennas prototyped by P Company in 1985 are still working normally, and they are subject to typhoons and heavy rains every year.


Strong wind resistance
Since the antenna reflection surface is designed during the molding process, multiple longitudinal and circumferential rib structures are designed. According to the structural strength calculation, the SMC antenna can withstand a wind load of 45 m/s, which shows its remarkable structural rigidity and strength.


Reflective layer technology
The reflective surface of the SMC antenna uses a metal aluminum mesh as the reflection layer of the electromagnetic wave, and the aluminum mesh in the finished antenna is uniformly embedded under the surface SMC, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role.


Easy to transport and install
Because the SMC antenna adopts the membrane pressure technology under high temperature and high pressure, it's material characteristics and processing technology determine the unparalleled consistency of the SMC antenna with other antennas, which not only ensures the accuracy and high gain of the antenna but also is very easy to install. debugging. SMC, commonly known as "glass reinforced plastic", has the characteristics of no deformation, which eliminates the adverse effects of antenna deformation on the satellite receiving system during transportation.
  • Title
  • Message
  • Email Address*
Send