Top X Technology Co., Ltd
Email: rfproducts1@ctrfantennas.com
C&T RF Antennas Inc
Mobile: 0086-13412239096

Indoor-Outdoor Antenna 2dBi 1.4GHz Omnidirectional Fiberglass Antenna

A full day working indoor-outdoor antenna waterproof antenna 2dBi 1.4GHz omnidirectional antenna back color fiberglass antenna with N-male connector.

These robust Omni directional antennas are designed for years of outdoor use.

The heavy-duty Wireless omnidirectional antennas are rugged and high performance.

These antennas feature a durable fiberglass all weather operation design and include a pole mounting bracket.


Feature:

Exquisite appearance

Good impact resistance, waterproofing and anticorrosion ability

Full day working

Optimized dimension

High gain, low standing wave, strong anti-interference ability


0.00
0.00
  
Product Description

A full day working indoor-outdoor antenna waterproof antenna 2dBi 1.4GHz omnidirectional antenna back color fiberglass antenna with N-male connector.

These robust Omni directional antennas are designed for years of outdoor use.

The heavy-duty Wireless omnidirectional antennas are rugged and high performance.

These antennas feature a durable fiberglass all weather operation design and include a pole mounting bracket.


Feature:

Exquisite appearance

Good impact resistance, waterproofing and anticorrosion ability

Full day working

Optimized dimension

High gain, low standing wave, strong anti-interference ability




A full day working indoor-outdoor antenna waterproof antenna 2dBi 1.4GHz omnidirectional antenna back color fiberglass antenna with N-male connector.

These robust Omni directional antennas are designed for years of outdoor use.
The heavy-duty Wireless omnidirectional antennas are rugged and high performance.
These antennas feature a durable fiberglass all weather operation design and include a pole mounting bracket.


Feature:
Exquisite appearance
Good impact resistance, waterproofing and anticorrosion ability
Full day working
Optimized dimension
High gain, low standing wave, strong anti-interference ability


2dBi  1.4GHz  Omnidirectional  Fiberglass Antenna Specifications:
Item: CTFB- 1414-N-16-200
Frequency: 1427-1447MHz
Gain: 2dBi
H-Beam width: 360°
V-Beam width: 65°±10°
V.S.W.R: ≤1.5
Impedance: 50Ohms
Maximum Power: 100Matts
Antenna Design: Dipole Array
Connector: N-Male
Polarization: Vertical
Dimension:  Φ 16*200mm
Radome Material: Black Fiberglass
Storage Temperature Range: -40~+75°C
Working Temperature Range: -40~+65°C
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing


Features:
Low-Profile
Low V.S.W.R
Low Loss Design
High Gain
High Efficiency
High Sensitivity
UV-Proof
Water Proof
Sturdy
Durable
Anticorrosive
Anti-interference
Good Impact Resistance
Full Day Working
Optimized Dimensions

C&T RF Antennas Inc is specialized in Antenna field, standard antenna, the measurement, and calibration of antenna performance, customized antenna, and RF solution. Moreover, our company manufactures a range of antennas that are used successfully by many domestic and foreign organizations; we have an R&D team that with over 8 years antenna experiences, and accurate instruments for the requirement of all delighted customers. 

To achieve the demands of customers is our mission; furthermore, we are willing to do our utmost for all customers. If we can offer any further assistance please contact us promptly; we convince that C&T RF is your best choice.

Qualified and experienced R&D staff
● mechanical engineering
● electronics / RF engineering
● process engineering
New methods and procedures
High-level equipment and CAD-Systems
Easy data exchange system

Our service:
●8 years experience of C&T RF Antennas Inc. mainly manufactures outdoor antenna, indoor antenna, marine antenna, the base station antenna, and tv antenna products. 
● Our sales will reply your inquiry within 24 working hours. 
● Customized design is available, OEM is welcomed. 
● Excellent after-sales service.

Shipment:
1. The parts from us are sure to have the quality warranty, and they are double tested before shipping.
2. The items can be sent within 7working day after the payment reaches us, except for mass process, we will confirm the delivery in advance.
3. We can send your order by UPS/DHL/TNT/EMS/FedEx. Please contact us directly and we will use your preferred ways.
4. Any import fees or charges are the buyer's responsibility. But we can help you reduce and avoid import taxes by declaring prices low, declaring the contents as "electronic accessories" or other items and shipping in simple packaging.




Information is corrected by Calio Huang of C&T RF Antennas Inc

What is the fiberglass antenna?

Characteristics
SMC, the sheet molding compound, is made of unsaturated polyester resin, glass fiber roving, and other matching materials through a special equipment SMC forming unit, which is thickened, cut, and placed into a metal mold. Made by high temperature and high-pressure curing. SMC and its molded products are emerging as glass fiber reinforced plastics, commonly known as FRP. The processing methods can be divided into: hand lay-up, spray forming, pultrusion, winding forming, resin transfer molding, and compression molding.  SMC and its molded products have the following characteristics: lightweight, high strength, accurate size, good batch quality consistency, and zero shrinkage of the product. With Class A surface level, mechanized, the high degree of automation, suitable for products with high surface quality requirements, large output, and uniform thickness.


Three high
High precision, high efficiency, high gain
The most important task in the use of SMC for the manufacture of antennas is to fully exploit their features and achieve the high precision of antennas from product design and process fabrication. Under the condition that the shrinkage rate of the material and the SMC molding shrinkage rate have been considered in the mold size design, the shape of the SMC antenna reflective surface deviates from the original design parabola after molding, that is, the accuracy of the SMC molded antenna is completely guaranteed by the precision of the mold. . The RMS value of the SMC antenna molded integral reflection surface is 0.25 mm, and the RMS value of the single-piece reflection surface of the split antenna is less than 0.3 mm, and the RMS value of the reflective surface after assembly is less than 0.6 mm.


Anti-corrosion
Conventional antenna materials such as aluminum plates and steel plates are made of metal materials, and are excellent in acid resistance, alkali, salt, and corrosion resistance, and are SMCs which are non-metal dielectric composite materials. The Pilkington laboratory in the United States used infrared to analyze the surface of SMC materials and found that its surface is covered by additives, resin, and very fine calcium acid filler. It has good acid resistance, water resistance, and corrosion resistance. The antenna reflection made by this material is solved. The disadvantages of traditional metal material antennas are easy to corrode. In coastal areas, rainy, humid areas and areas with excessive acid rain, the corrosion of SMC molded antennas is particularly prominent. The US company Podlin has conducted more stringent corrosion tests. The SMC molded antenna samples were placed in 130 highly corrosive chemical environments at an ambient temperature of 50 ° C. The results showed that the test samples showed little or no change.


long life
The average aluminum plate antenna is as small as 2-3 years in the coastal area, and more often 4-6 years. It is generally damaged by salt spray erosion and aging. The most obvious example is cable TV in Taiwan, which was built earlier than the mainland. It is estimated that there are nearly 1000 satellite TV receiving antennas on the island, which were all built in the mid-1980s. They are all aluminum plate antennas. They have been replaced since the early 1990s. This time, SMC molded antennas have been used. SMC molded antennas have been used. The service life is generally more than 15 years; the SMC molded antennas prototyped by P Company in 1985 are still working normally, and they are subject to typhoons and heavy rains every year.


Strong wind resistance
Since the antenna reflection surface is designed during the molding process, multiple longitudinal and circumferential rib structures are designed. According to the structural strength calculation, the SMC antenna can withstand a wind load of 45 m/s, which shows its remarkable structural rigidity and strength.


Reflective layer technology
The reflective surface of the SMC antenna uses a metal aluminum mesh as the reflection layer of the electromagnetic wave, and the aluminum mesh in the finished antenna is uniformly embedded under the surface SMC, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role.


Easy to transport and install
Because the SMC antenna adopts the membrane pressure technology under high temperature and high pressure, it's material characteristics and processing technology determine the unparalleled consistency of the SMC antenna with other antennas, which not only ensures the accuracy and high gain of the antenna but also is very easy to install. debugging. SMC, commonly known as "glass reinforced plastic", has the characteristics of no deformation, which eliminates the adverse effects of antenna deformation on the satellite receiving system during transportation.



Directional or Omnidirectional?
The most antenna can be categorized as either directional or omnidirectional. Omnidirectional antennas receive and transmit at a 360 degrees radius, radiating powder uniformly in all directions on one plane. This type of the antenna is usually pole-shaped and situated on a metal plane (car roof, for example,) which acts as the bottom half of the dipole. They are commonly used for GPS applications, vehicles, and emergency radio and have a higher gain in horizontal directions.


Directional antennas primarily receive and transmit energy in one direction. The most common type of directional antenna is the Yagi- it’s usually used as a TV aerial and promotes energy in one direction, using multiple prongs to encourage overall gain. Directional antennas are good for home/business use as you can tune the system for optimal coverage. With a directional antenna, the more focused the energy (the smaller the percentage of 360 degrees that the signal radiates,) the larger it’s the reachable distance.


RF antennas are divided into two categories: directional antennas and omnidirectional antennas. Directional antennas include in-ceiling dome RF antennas, Yagi antennas, passive GPS and active GPS antennas, fixed and panel antennas. Our directional RF antennas offer low, medium and high gain options with corresponding variations in beam width, from broad beam / low gain, to narrow beam / high gain antennas. Our omnidirectional antennas include medium gain fixed antennas, mobile antennas, low gain portable and rubber duck antennas. Our omnidirectional antennas are ultra-violet (UV) resistant and built with rugged construction suitable for harsh environment applications including base stations. 



The C&T RF antennas Inc locates in Dongguan City, Guangdong province, was established on May 12, 2011. The company is specializing in the production of 2.4G antenna, 3G antenna, AP antenna, NB antenna, WIFI antenna, Vehicle DVB-T, ISDB, ATSC CMMB antenna, digital TV antenna, 3G antenna, 4G antenna, spring antenna, high gain antenna, mobile phone antenna, router antenna, GSM/CDMA/GPRS antenna, GPS antenna, navigation GPS communication antenna, RF connector, RF cable assemblies, etc, with good production environment, professional production and testing equipment and advanced production technology, perfect testing standards and quality management system.


The company also has a senior team in management and engineering, and business development staff. 


With strong R & D capabilities, our products currently face both domestic and foreign markets, mainly serving the industries of automotive, computer, wireless router, satellite positioning navigation, ship, satellite communication etc.


Why Choose Us?
We have a good production environment, professional production, and testing equipment and advanced production technology, perfect testing standards, and quality management system
Our mission is professional, concentrative, best quality best service responsible for our customers!


Concurrent radio, as well as switched Smart Antenna options, are available.


  • Title
  • Message
  • Email Address*
Send