Top X Technology Co., Ltd
Email: rfproducts1@ctrfantennas.com
C&T RF Antennas Inc
Mobile: 0086-13412239096

Customized LTE 4G embedded PCB antenna with RG cable 1.13 76.5mm length

Customized embedded PCB antenna LTE 4G full band internal antenna with RG cable 1.13 76.5mm length and the U.FL connector mount

0.00
0.00
  
Product Description

Customized embedded PCB antenna LTE 4G full band internal antenna with RG cable 1.13 76.5mm length and the U.FL connector mount



Customized embedded PCB antenna LTE 4G full band internal antenna with RG cable 1.13 76.5mm length and the U.FL connector mount


RF Antenna Type: Embedded PCB Antenna
Frequency -MHz: 700-960Mhz, 1710-2700Mhz,
Material: PCB + cable + connector
Gain-dBi: 2dBi
Cable Type: RG1.13 
Cable Length:  76.5mm
VSWR: ≤1.8
Impedance-Ω: 50 
Polarization: Vertical
Max.Power-W: 20W
Connector: The U.FL for pigtail extender
Color: Green
Weight-g: 3g
PCB Size: 48.5x25.2mm
Input impedance: 50Ω
Polarization: Vertical
Lightning protection: DC ground


4G LTE Frequencies
Since 4G LTE networks in China, Europe, and the USA and other parts of the world are set up to operate between 698 MHz and 2700 MHz, only multi-band antennas catering for the full frequency range should be used for 4G LTE. A great advantage of this is that these multi-band antennas also cover the GSM, GPRS, and CDMA, UMTS frequencies. Where reception is good enough, omnidirectional antennas should suffice. In problematic reception conditions, a beam or directional antenna, which in principle operates more efficiently, can be used instead.


Applications:
•         Long Term Evolution (LTE), more commonly marketed as 4G LTE, is an industry standard for wireless communication of high-speed data for mobile phones and data terminals.
•         WiFi is a local area wireless network that allows an electronic device to connect to the internet using 2.4 GHz UHF and 5 GHz SHF radio waves.
•         Code-Division Multiple Access (CDMA), a digital cellular technology that uses spread-spectrum techniques. This
•         Time Division Multiple Access (TDMA), a technology for delivering digital wireless service using time-division multiplexing.
•         Global System for Mobile Communications (GSM), one of the leading digital cellular systems. GSM uses narrowband TDMA, which allows eight simultaneous calls on the same radio frequency.
•         General Packet Radio Service (GPRS), a standard for wireless communications which runs at speeds up to 115 kilobits per second.



The C&T RF antennas Inc’s embedded or internal antennas support a wide range of applications such as remote control,  data transfer, wireless sensor networks and WiFi.


The C&T RF antennas Inc’s embedded/internal antennas are designed to directly integrate into devices requiring wireless capability. By embedding these antennas directly into a device, the need for external antennas is eliminated. These highly efficient low profile FPC/PCB-based antenna solutions are ideal for embedded applications requiring integration flexibility.


In addition to our standard embedded antenna offerings, The C&T RF antennas Inc engineering can also custom design embedded antenna solutions to meet specific customer applications. This may include:


Custom shape and sizes
Mounting options such as double-sided tape to mounting holes in the PCB
Custom cable lengths and type
Multiple connector options including MMCX, U.FL SMA
Frequency and gain
Omni-directional or directional type


The C&T RF antennas Inc locates in Dongguan City, Guangdong province, was established on May 12, 2011. The company is specializing in the production of 2.4G antenna, 3G antenna, AP antenna, NB antenna, WIFI antenna, Vehicle DVB-T, ISDB, ATSC CMMB antenna, digital TV antenna, 3G antenna, 4G antenna, spring antenna, high gain antenna, mobile phone antenna, router antenna, GSM/CDMA/GPRS antenna, GPS antenna, navigation GPS communication antenna, RF connector, RF cable assemblies, etc, with good production environment, professional production and testing equipment and advanced production technology, perfect testing standards and quality management system.


The company also has a senior team in management and engineering, and business development staff. 


With strong R & D capabilities, our products currently face both domestic and foreign markets, mainly serving the industries of automotive, computer, wireless router, satellite positioning navigation, ship, satellite communication etc.


Why Choose Us?
We have a good production environment, professional production, and testing equipment and advanced production technology, perfect testing standards, and quality management system
Our mission is professional, concentrative, best quality best service responsible for our customers!


Concurrent radio, as well as switched Smart Antenna options, are available.




All PCB(Printed-Circuit-Board) antennas are board specific and the dimensions and matching will need to be determined for each implementation.  Copying an existing design does not ensure good performance.  Gain and radiation patterns will vary as the parameters in the surrounding areas change.   The length of the antenna will need to be adjusted according to these variables.  Additionally, the final tuning and matching should be completed in the end product enclosure and installation, not in open air.


The C&T RF antennas Inc’s PCB-Based Embedded Antennas for RF solutions
The C&T RF antennas Inc’s Embedded Antennas feature highly efficient PCB-based low profile design optimized for confined industrial designs. Ideal for embedded applications requiring integration flexibility, the Profile family includes case, through-hole, and SMT mount designs and is available in single, dual, and tri-band applications.
Features:
1).Highly efficient PCB-based antenna solutions for ODMs and OEMs
2). Low profile embedded antenna design for confined industrial designs
3). The case, through-hole, & SMT mount designs for embedded applications requiring integration customization
4). Designed for use in WLAN, WiFi, GSM, GPRS, GPS, LPD (433MHz), and Cellular LTE frequency bands


Benefits:
Stable and reliable in performances
PCB antenna has excellent sensitivity to consistently provide high signal reception efficiency
Compact size
RoHS compliance


The C&T RF antennas Inc’ embedded antenna attaches directly to the PCB and is hidden inside the product case. They’re a good fit for applications where concerns about size, appearance, security or environmental issues make an external antenna impractical.


Welcome to C&T RF Antennas Inc


C&T RF Antennas Inc is a professional RF Antenna designer and supplier of innovative multi-band antenna products, standard, and custom RF coaxial cables and associated RF accessories. Our antennas are designed for IoT, M2M, telematics, telemetry and monitoring applications using both licensed and unlicensed frequency bands.


Our product portfolio includes internal and external antennas designed to fit into a range of portable, mobile and fixed devices as well as an extensive range of antenna solutions for indoor and outdoor use.


Our products are deployed in applications using LTE, 4G, GPS/GLONASS, WiFi, VHF, UHF and many other wireless technologies.



Custom Antenna Design

Custom Antenna Design & Manufacturing

Accelerate your wireless product development with C&T RF Antennas Inc's end-to-end custom antenna design and manufacturing.

C&T RF Antennas Inc, the custom antenna supplier for many of the world’s leading brands, offers state-of-the-art, turnkey OEM custom design services for a wide variety of antennas in frequencies from 30 MHz to 40 GHz. With the proliferation of diverse applications in both commercial and consumer markets, antenna design has become even more challenging for many manufacturers.

After decades of design engineering and OEM manufacturing experience, C&T RF Antennas Inc’s superior design, RF engineering, and testing practices have set the standard for high performance and reliability.


The C&T RF antennas Inc’s embedded/internal antennas are designed to directly integrate into devices requiring wireless capability. By embedding these antennas directly into a device, the need for external antennas is eliminated. These highly efficient low profile FPC/ PCB-based antenna solutions are ideal for embedded applications requiring integration flexibility.


In addition to our standard embedded antenna offerings, The C&T RF antennas Inc engineering can also custom design embedded antenna solutions to meet specific customer applications.


High-Performance RF Antennas
C&T RF Antennas Inc is the leading supplier of the highest quality antennas engineered for superior performance. We provide antenna solutions for Cellular, Two-Way Radio, Wi-Fi, Bluetooth, GPS, RFID, LPWAN, ISM, and a wide range of IoT/M2M applications. In addition to our off-the-shelf solutions, we provide comprehensive antenna design support such as simulation, testing and manufacturing for custom antenna solutions to meet your specific application needs.


Why choose C&T RF Antennas Inc as your antenna supplier of choice?
The Industry Leader in Antenna Performance with Reliability
Custom OEM Solutions: Simulation, Design, and Manufacturing
State of the Art Production and Testing Facilities, Specializing in PIM Performance
Broad Expertise from 5G Massive MIMO to Ultra Small Embedded Antennas


  • Title
  • Message
Send